JM M4A1 Gen8

  • 10 amp trigger switch

    0 out of 5
    Description The Gen 8 M4A1 is a solid blaster straight out of the box. Housing the popular and easy to work with Jinming Gen 8 gearbox it packs a punch.   Performance/Features 260 FPS 16RPS Range 20-25m 7-8mm ammo
  • 13:1 SHS Hardened Gears

    0 out of 5
    These are a higher end gear. 13:1 ratio gears are applied when seeking a high ROF (rate of fire) build. *please note your blaster model in purchase/cart notes. Brands may vary from time to time but the quality will remain high end. These do not come with pinion gear or anti reverse latch.
  • 14 Tooth Nylon Piston With Hardened Metal Rack

    0 out of 5
    Nylon Piston Features:
    • 14 Tooth piston, stronger and lighter than an SHS.
    • Hardened Metal Rack
  • 8mm Cylinder Head & Tip With Double O-ring

    0 out of 5
    **Colour may very.
  • Accucell S60

    0 out of 5
    Accucel s60 is a 6 amp balance charger that chargers up to a 4s battery. It is incredibly quick and a lot safer than the stock chargers that come with a blaster. It will also prolong the life of your batteries through balancing charging.
  • Air Pads Sorbos Pk 1

    0 out of 5
    If you need to correct your AOE (Angle of engagement) these sorbo pads are the perfect way to. Size: 3/16" 70 D
  • Anti Reversal Latch

    0 out of 5
    The anti reversal latch stops your bevel gear from slipping backwards. *Please note blaster model when purchasing.
  • B3 Lipo Battery Charger

    0 out of 5


    The B3 Compact charger is a very simple to use charger for 2S and 3S battery packs. No need for additional power supplies or 12v batteries as this little unit has its own built in power supply that can be powered with 100-240v. The B3 is very easy to use, simply plug it into the mains power and the 3 LEDs will light green and then flash to red to indicate the charger is ready. Connect the balance lead of your battery to the balance port of the charger, after 2 secs the charger detects the voltage of the battery and starts charging. When the charger starts charging the LEDs will glow constant red, if the battery is a 2 cell then the cell LED indicators 1 and 2 will glow constantly, if it is a 3 cell then the cell 3 LED indicator will also glow. When a cell is completely charged the corresponding LED will turn green, when all cells turn green the battery is fully charged, disconnect the battery before switching off the charger.


    • Built in power supply
    • 100~240V Compatible
    • Automatic charge start
    • Simple, reliable and safe to use


    • AC Input: 100~240V, 50~60Hz
    • Battery Type: LiPoly
    • Cell Count: 2~3 Cells
    • Charge Current: 1.2A Max
    • Cell Cut Off Voltage: 4.2V ± 0.02V
    • Circuit Power: 11W ± 10%
    • Dimensions: 88x57x35mm
    • Weight: 103g
  • Barrel Stabilisers (Pack of 6)

    3.00 out of 5
    Barrel stabilisers give your barrel extra support when housed in an outer barrel. Helps increase accuracy through stabilisation.
  • Blue Chi Hai 460 Motor

    0 out of 5
    The Blue Chi Hai motor with pinion head This Motor has an outstanding reputation and for very good reason. Try and pull two of these apart you will see why. The magnets are truly rare earth magnets and have amazing pulling power. Beware cheap knock off Chi Hai motors. They can be stamped or unstamped and it’s hard to tell without putting two together. Ours are the real deal.
  • CNC Alloy Triggers

    0 out of 5
    Plastic triggers are infamous for breaking and usually at the worst of times. This is one budget-friendly mod worth doing. Available in three variations.