JM M4A1 Gen9

  • 13:1 SHS Hardened Gears

    0 out of 5
    These are a higher end gear. 13:1 ratio gears are applied when seeking a high ROF (rate of fire) build. *please note your blaster model in purchase/cart notes. Brands may vary from time to time but the quality will remain high end. These do not come with pinion gear or anti reverse latch.
  • 14 Tooth Nylon Piston With Hardened Metal Rack

    0 out of 5
    Nylon Piston Features:
    • 14 Tooth piston, stronger and lighter than an SHS.
    • Hardened Metal Rack
  • 32:1 Gears

    0 out of 5
    These 32:1 gears are a higher end gear used for higher torque builds. These gears are applied when seeking a higher FPS (feet per second) build. *Important note. These gears will only work with our SHS half teeth piston. *please note your blaster model in purchase/cart notes. Brands may vary from time to time but the quality will remain high end
  • 8mm cylinder tip with o-ring

    0 out of 5
  • Accucel S60

    0 out of 5
    Accucel s60 is a 6 amp balance charger that chargers up to a 4s battery. It is incredibly quick and a lot safer than the stock chargers that come with a blaster. It will also prolong the life of your batteries through balancing charging.
  • Air Pads Sorbos Pk 1

    0 out of 5
    If you need to correct your AOE (Angle of engagement) these sorbo pads are the perfect way to. Size: 3/16" 70 D
  • Anti Reversal Latch

    0 out of 5
    The anti reversal latch stops your bevel gear from slipping backwards. *Please note blaster model when purchasing.
  • B3 Lipo Battrey Charger

    0 out of 5


    The B3 Compact charger is a very simple to use charger for 2S and 3S battery packs. No need for additional power supplies or 12v batteries as this little unit has its own built in power supply that can be powered with 100-240v. The B3 is very easy to use, simply plug it into the mains power and the 3 LEDs will light green and then flash to red to indicate the charger is ready. Connect the balance lead of your battery to the balance port of the charger, after 2 secs the charger detects the voltage of the battery and starts charging. When the charger starts charging the LEDs will glow constant red, if the battery is a 2 cell then the cell LED indicators 1 and 2 will glow constantly, if it is a 3 cell then the cell 3 LED indicator will also glow. When a cell is completely charged the corresponding LED will turn green, when all cells turn green the battery is fully charged, disconnect the battery before switching off the charger.


    • Built in power supply
    • 100~240V Compatible
    • Automatic charge start
    • Simple, reliable and safe to use


    • AC Input: 100~240V, 50~60Hz
    • Battery Type: LiPoly
    • Cell Count: 2~3 Cells
    • Charge Current: 1.2A Max
    • Cell Cut Off Voltage: 4.2V ± 0.02V
    • Circuit Power: 11W ± 10%
    • Dimensions: 88x57x35mm
    • Weight: 103g
  • Barrel Stabilisers (Pack of 6)

    0 out of 5
    Barrel stabilisers give your barrel extra support when housed in an outer barrel. Helps increase accuracy through stabilisation.
  • Big Dragon M120 BD1309

    0 out of 5